Components you'll need:
PVC strip curtains
Mounting hardware (ordinarily bundled Using the curtains)
Tape evaluate
Pencil or marker
Drill
Screws
Action 1: Measure the doorway
Use a tape evaluate to find out the height and width of your doorway wherever you should set up the PVC strip curtains. Be sure to evaluate the width on the doorway at the top, Center, and bottom, and utilize the widest measurement.
Action 2: Lower the PVC strips to duration
Utilizing the measurements from step one, Lower the PVC strips to the right size. For those who have lots of strips to chop, consider using a straight edge in addition to a utility knife to speed read more up the procedure.
Phase 3: Connect the mounting hardware
Employing a drill and screws, attach the mounting components to the top of your doorway. Ensure the components is degree and protected.
Stage 4: Cling the PVC strips
Commence at a person aspect of your doorway and hang the PVC strips within the mounting hardware. Ensure that the strips are evenly spaced and hang straight. If needed, adjust the strips by sliding them alongside the mounting components.
Move 5: Trim the strips
If any in the strips are far too lengthy, make use of a set of scissors or a utility knife to trim them to the suitable size.
Move 6: Finish the installation
After all of the PVC strips are hung and trimmed, ensure These are properly aligned and modify them as essential. You may additionally want to include a bodyweight bar to The underside with the curtains to keep them from swinging inside the breeze.
That is it! You now have PVC strip curtains set up as part of your doorway.